|
 Trombones
|
Conn
- USA is the leading manufacturer and distributor of band and
orchestral instruments for professional, amateur and student use.
The Company manufactures and distributes its products under a
variety of well-known brand names, including Vincent Bach brass,
Selmer USA woodwinds, C.G. Conn brass and King brass, |
| Alto Trombones |
|
 |
Conn
34H
Eb Alto Trombone
Symphony, key of Eb, 7" (178mm) bell,
.491/.500" (12.47/12.70mm) bore, brass outer slide, chrome-plated
inner slides, lacquered brass, 7C mouthpiece, deluxe woodshell
case. An alto trombone with slide positions in the same relative
positions as those of a tenor trombone. Full warranty. Optional
on this model is a bright silver plated finish.
| £ 1,325.00 |
 |
|
|
Conn
36H
Eb Alto Trombone w/Bb Attachment
Symphony, key of Eb, 7" (178mm) bell,
.491/.500" (12.47/12.70mm) bore, Bb rotor attachment, brass outer
slide, chrome-plated inner slides, lacquer finish, 7C mouthpiece,
deluxe woodshell case. An alto trombone with slide positions in
the same relative positions as those of a tenor trombone. The unique
Bb rotor offers added facility in difficult passages and makes possible
some trill passages. Full warranty. Optional on this model is a
bright silver plated finish.
| £
1615 |
|
|
Small
Bore "Jazz" Trombone |
 |
Conn
100H
Jazz Tenor Trombone
Artist, .500" (12.70mm) bore, 7-3/8"
(187mm) yellow brass bell, 3 interchangeable leadpipes, lightweight
slide, lacquer finish, woodshell case. Ideal for lead or solo performance.
Full warranty. Options include silver plating (model 100-SP) or
a black nylon tenor trombone gig bag with shoulder strap.
- standard yellow brass bell.
| £1,499.00 |
|
|
Medium-Large
Bore Tenor Trombone |
 |
Conn
52H
Medium-Large Bore Tenor Trombone
Artist, dual bore with F attachment,
8-5/8" (219mm) rose brass bell, .525"/.547" (13.34/13.89mm) dual
bore slide, lacquer finish, 6-1/2ALS small shank mouthpiece, woodshell
case. The 52H helps advancing players make a smooth transition from
a small bore to a larger symphonic trombone. With a medium-large
dual bore and a convenient finger ring on the slide for smaller
hands, the horn is a good match for intermediate level players.
The dual bore helps provide the larger sound needed in concert band
& orchestra, while allowing for an acceptable "lead" sound in jazz
ensembles. The 52H's use of a small shank mouthpiece and its 525
primary bore helps give the player greater flexibilty and a clearer
(and easier) high range while requiring less air than a large bore
model. A straight 547 bore slide can be added later to make this
instrument a true symphony model.
| £1,769.00 |
|
|
Large Bore "Symphonic" Tenor Trombones |
 |
Conn
8H
Symphonic Tenor Trombone
Symphony, .547" (13.89mm) bore, 8-1/2"
(216mm) rose brass bell, rose brass outer slide, lacquer finish,
5G mouthpiece, deluxe woodshell case. Full warranty. Options include
a variety of handslides with removable leadpipes; bright silver
plated finish; and a black nylon tenor trombone gig bag with shoulder
strap. below to additional available options.
- standard rose brass bell.
| £1,430.00 |
|
|
|
Conn
88H
Symphonic Tenor Trombone with traditional
F Attachment
Symphony, .547" (13.89mm) bore, .562"
(14.27mm) bore through F attachment, 8-1/2" (216mm) rose brass bell,
rose brass outer slide, lacquer finish, 5G mouthpiece, deluxe woodshell
case. This famous tenor model delivers superior response in all
registers. Traditional F attachment is compact and more resistant
to damage than open wrap models. Made in Ohio, this trombone is
a close replica of the old Elkhart horns of legend. To get even
closer, choose the thinwall bell model listed below. Full warranty.
Options include a variety of handslides with removable leadpipes;
bright silver plated finish; and a black nylon tenor trombone gig
bag with shoulder strap.
Variations on this model include: - standard
rose brass bell.
88HT - with
Elkhart style thinwall bell (for better response).
NEW 88HTG - with Elkhart
style bell and Greenhoe Valve
88HY
- with yellow brass bell (for more projection).
88H-SGX -
with solid sterling silver bell and gold plated trim.
|
|
Conn
88HO
Symphonic Tenor Trombone with Open Wrap F
Attachment
Symphony, .547" (13.89mm) bore, .562"
(14.27mm) bore through open wrap F attachment, 8-1/2" (216mm) rose
brass bell, rose brass outer slide, lacquer finish, Conn 5G mouthpiece,
deluxe woodshell case. This instrument has won overwhelming acclaim
for its evenness of sound, excellent response, and flexibility of
performance. Full warranty. Options include a variety of handslides
with removable leadpipes; bright silver plated finish; and a black
nylon tenor trombone gig bag with shoulder strap.
Variations on this model include:
- 88HO
- with standard rose brass bell.
- 88HTO
- with Elkhart style thinwall bell (for better
response).
- 88HYO
- with yellow brass bell (for more projection).
- 88HO-SGX
- with solid sterling silver bell and gold plated trim.
- 88KO
- with large throated, 9" bell (for more power).
|
|
Conn
88HCL
Symphonic Tenor Trombone with Christian Lindberg
rotor
Symphony, .547" (13.89mm) bore with patented
CL2000 F rotor system, open wrap, .562" (14.27mm) bore through F
attachment, 8-1/2" (216mm) rose brass bell & outer slide, lacquer
finish, C.G. Conn mouthpiece, woodshell case. The CL2000 rotor system
provides 40% faster action & virtually eliminates any response difference
between the F attachment & straight trombone sides. Full warranty.
Options include a variety of handslides with removable leadpipes;
bright silver plated finish; and a black nylon tenor trombone gig
bag with shoulder strap.
Variations on this model include:
- 88HCL - with standard rose
brass bell.
- 88HT-CL - with Elkhart style
thinwall bell (for better response).
- 88HK-CL - with large throated,
9" bell (for more power).
- 88H-SGX-CL - with solid sterling
silver bell and gold plated trim.
|
Bass
Trombones |
|
 |
Conn
62H
Bass Trombone with Dual Dependant Rotors
The "Bill Reichenbach" bass. Double
dependant rotor system, .562" (14.27mm) primary bore, .580" (14.73mm)
bore through rotor sections, 9" (229mm) annealed rose brass bell,
three interchangeable leadpipes, chrome-plated inner slides, lacquer
finish, 1-1/2G mouthpiece, deluxe woodshell case. Full warranty.
Options include bright silver plated finish; and a black nylon
gig bag with shoulder strap.
|
|
Conn
62Hi
Bass Trombone with Dual Independant Rotors
Double independant rotor system, .562"
(14.27mm) primary bore, .580" (14.73mm) bore through rotor sections,
9" (229mm) annealed rose brass bell, three interchangeable leadpipes,
chrome-plated inner slides, lacquer finish, 1-1/2G mouthpiece, deluxe
woodshell case. Full warranty. Options include bright silver plated
finish; and a black nylon gig bag with shoulder strap.
|
|
NEW
Conn 62HCG
Bass Trombone with Dual Independant Greenhoe
Valves
Double independant Greenhoe valve system,
.562" (14.27mm) primary bore, 9" (229mm) annealed rose brass bell,
three interchangeable leadpipes, chrome-plated inner slides, lacquer
finish, 1-1/2G mouthpiece, deluxe woodshell case. Full warranty.
Optional bright silver plated finish.
|
|
Conn
62HCL
Bass Trombone with Dual Independant CL2000
Rotors
Double independant CL2000 Lindberg valve
system, .562" (14.27mm) primary bore, 9" (229mm) annealed rose brass
bell, three interchangeable leadpipes, chrome-plated inner slides,
lacquer finish, 1-1/2G mouthpiece, deluxe woodshell case. Full warranty.
Optional bright silver plated finish.
|
|
Conn
110H
Bass Trombone with Open Wrap
Single Rotor Bass, .562" (14.27mm) bore,
10" (254mm) rose brass bell, F rotor, lightweight slide, chrome-plated
inner slides, new linkage, lacquer finish, 1-1/2G mouthpiece, deluxe
woodshell case. An excellent choice for the player who desires a
basic single rotor instrument. Full warranty. Options include bright
silver plated finish; and a black nylon gig bag with shoulder strap.
|
|
Conn
112H
Bass Trombone with Dual Rotors & Open Wrap
Double Rotor Bass, .562" (14.27mm) bore,
10" (254mm) rose brass bell, F rotor, lightweight slide, chrome-plated
inner slides, lacquer finish, 1-1/2G mouthpiece, deluxe woodshell
case. First rotor in F, second rotor in Gb; activating both rotors
enhances D in first position. An optional D slide permits low B
natural in first position when both triggers are engaged. Full warranty.
Options include bright silver plated finish; and a black nylon gig
bag with shoulder strap.
|
Slide
& Leadpipe Options for 8H & 88H models. |
|
Slides
(all include three leadpipes, described below) |
SL2525
Medium Bore (item 38234)
Medium bore (0.525") slide normally found
on medium bore Conn instruments such as the 79H (no longer manufactured)
or the Bach 36 series. Designed to increase upper register focus
and allow for a more compact feel overall. Good choice for commercial
or jazz work. Includes leadpipe models X, T and H (details below).
|
| |
SL2547
Medium Dual Bore (item 38235)
Medium-Large dual bore slide combines
a 0.525" upper tube with a 0.547" lower tube. Designed to increase
focus and clarity in the upper register when compared to a straight
547 bore slide. Good choice for the principal symphonic or concert
band player. Includes three leadpipes, modelx H, T and X (details
below).
|
| |
SL4747
Large Bore (item 38236)
Standard Large bore (0.547") slide
traditionally found on the 88H series trombone. This enhanced
model features three removable leadpipes for increased versatility,
wheras the standard 547 slide has one fixed leadpipe. Leadpipe
models include S, R and M (details below).
|
| |
SL4762
Large Dual Bore (item 38237)
Large dual-bore slide combines a traditional
large bore (0.547") upper tube with a bass trombone bore (0.562")
lower tube. This popular model gives a more open feel, decreases
focus somewhat, and reduces "edge" in loud passages. Includes three
leadpipes models S, R and M (details below).
|
| |
SL6262
Bass Bore (item 38238)
Bass Trombone bore (0.562") slide designed
to fit the 8H/88H series trombone. While not converting the instrument
to a true bass trombone, this super large slide allows the 88H to
better function as the low trombone in early music (Mozart Requiem,
etc), commercial and concert band settings. Includes three leadpipes
models B, C and D (details below).
|
|
|
| Leadpipes |
Model
B
Features a standard large shank receiver
with a longer venturi and slower taper than normal. Designed to
give traditional response characteristics on the oversized SL4762
slide. |
| |
Model
C
Features a standard large shank receiver
with a shorter venturi and slower taper than normal. Designed for
added stability. For use with the SL4762 slide. |
| |
Model
D
Features a standard large shank receiver
with a shorter venturi and faster taper than normal. Designed for
increased flexibility. For use with the SL4762 slide. |
| |
Model
H
Features a standard small shank receiver
with a short venturi pipe for a combination of flexibility and control.
For use with SL2525 and SL2547 slides. |
| |
Model
M
Features a standard large shank receiver
with a longer taper than normal. Designed to decrease resistance.
For use with SL4747 and SL4762 slides. |
| |
Model
R
Features a Remington shank receiver with
a standard venturi taper. Designed to give traditional response
when used with a Remington shank mouthpiece. For use with SL4747
and SL4762 slides. |
| |
Model
S
Features a standard large shank receiver
with a standard venturi taper. Designed to give traditional response
characteristics. For use with SL4747 and SL4762 slides. |
| |
Model
T
Features a standard small shank receiver
with a long venturi for greater control (i.e. "slotting"). For use
with SL2525 and SL2547 slides. |
| |
Model
X
Features a large shank receiver with
a straight taper designed for great flexibility. For use with SL2525
and SL2547 slides. This hybrid design allows you to use your existing
large shank mouthpiece in a medium bore slide that would normally
only accept a small shank mouthpiece. |
|
